Product Overview
The HLP demineralizers are the most popular tap water-powered devices that meet all the requirements of any modern laboratory in terms of demand for water suitable for analytical and instrumental purposes. Obtained water with a conductivity below 0.06 µS/cm meets the requirements of PN-EN ISO 3696:1999, ASTM, CLSI, EP. The resulting water can be used for instrumental analysis AAS, ICP / MS, IC, HPLC, GC (depending on the model).
Cat. no.: DH-0010-00
Features
– Fed by tap water.
– Water purification levels:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.
– Efficiency min. 10-12 dm3/h.
– Demineralized water conductivity 0,06 μS/cm.
– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI).
– Tank 10 dm3.
– Obtained water may be used for instrumental analyses AAS and for general-purpose research.
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.
Dimensions: (SxGxW): 235x470x570 mm Tank 10l: height: 390 mm, diameter: 250 mm
Functions monitoring the device:
• The device is equipped with a microprocessor control and measurement system that includes:
- LCD display screen 2x16 characters
- conductometer measuring conductivity and temperature of purified water (measured in µS/cm or MOhm),
- reading values compensated and uncompensated thermally, - timer displaying current date and time,
- alarm informing about necessity to replace sediment filter and module A,
- alarm informing about necessity to replace ionex resins,
- menu in English, Russian, Spanish or German,
- maintenance deadlines preview, - built-in RS 232 connector for personal computers,
- individual adjustment of maintenance frequency and alarm levels.
• Software.
• Built-in manometer measuring feed water pressure.
Functions protecting the device:
• Pomp shutdown when:
- feed water pressure is too low (lack of feed water)
– low-pressure sensor,
- the tank is full
– high-pressure sensor.
Usage:
Obtained water may be used for instrumental analyses AAS, ICP/MS*, IC, HPLC*, GC, bacteria cultures*, biochemical analyses* and for general-purpose research.
*point with microfiltration cascade capsule 0,45/0,2μm
Required connections:
- cold tap water connection ½” lub ¾”,
- 230V socket, - drain.
Package Included:
Sediment prefilter 5µm EO-005-10
Module A2 EO-MA-12
Module H6 EJ-5000-0
| Product More Specifications | |
|---|---|
| Specification | Technical specification: - The device works under tap water pressure. - Fed by tap water. - Water purification levels: • sediment pre-filter 5µm, • integrated module (sediment-carbon-softening), • reverse osmosis, • demineralization on a mixed ionex resin. - Efficiency min. 10-12 dm3/h. - Demineralized water conductivity 0,06 μS/cm. - Unattended and automated. - The possibility of equipped with a pump 24V increasing feed water pressure. - Water intake point with second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) - nozzle reach min. 2 m, equipped with a 10 dm3 pressure tank. - The possibility of installing additional water intake point for general-purpose water (third class (PN-EN ISO 3696:1999)). - The possibility of installing additional water intake point with first class (PN-EN ISO 3696:1999 - with a 0,2μm microfiltration capsule). - Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right. - Optional replacement with a bigger tank (40dm3, 80dm3 and more). - Automated system shutdown when the tank is full. - Optional connection to an autoclave, washer machine etc. - Maintenance procedures may be performed by the user (easy replacement of disposables). - Fed by cold water: 5-40°C. - Power supply: 230V/50Hz. - Can be installed by the user. - Acid-proof stainless steel (inox) housing. Dimensions (SxGxW): 235x470x570 mm Tank 10l: height: 390 mm, diameter: 250 mm |
| Made In | Poland |
No questions yet. Be the first to ask.
No reviews yet.
Log in to review this product after your order arrives. Log in