Menu
Your Cart

Water Purification System R20 UV

Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV
Water Purification System R20 UV

Product Overview

R demineralizers are devices that combine features of two series: Technical and Ultra into one system, optimizing in - vestment costs by reduction of shared construction areas. These devices produce ultrapure water fitting the FP and PN-EN ISO 3696:1999 standard for first purity class. They are also equipped with an extended automatics, that al - lows the user to monitor disposables performance, data archiving, individual adjustment of alarm levels for feed water parameters, water after reverse osmosis and ultra - pure, along with controlling the function of automatic membrane modules rinsing. These systems also have a set of protections for comfortable system operation

Functions monitoring system performance:

The device is equipped with microprocessor control and measurement system, that includes:
• Color display screen with a Touch Panel function.
• Conductometer measuring water pressure: feed, after reverse. osmosis and demineralized (in µS/cm or MOhm).
• Displaying values compensated thermally.
• Clock displaying date and time.
• Actual system state information.
• Membrane retention level information.
• Tank fill level.
• Alarm informing about the necessity to replace the RO module.
• Alarm informing about the necessity to replace the mechanical filter and module A.
• Alarm informing about the necessity to replace the ion exchange module.
• Alarm informing about the necessity to replace the UV lamp radiator.
• Alarm informing about the necessity to replace the microfiltration capsule.
• Alarm informing about the necessity to replace the ultrafiltration capsule.
• Graphic and sound alarm signal.
• Service dates display.
• RS 232 connector for service frequency and alarm levels adjustment.
• USB connector for service frequency and alarm levels adjustment.
• Software.
• Built-in feed water manometer

Functions protecting system performance:

• Pump shutdown when:
- feed water pressure is too low (no feed water) - low-pressure sensor,
- tank is full - high-pressure sensor.
• RO thermal protection - automatic system shutdown if the feedwater temperature is below 4 0C or above 40 0C.
• Can be automatically shut down when any alarm occurs.
• System autostart.
• System message/alarm view

Feed water parameters:
• Conductivity  1200 µS/cm
• Pressure  3,0 bar.
• Temperature: 4-40 0C.
• Hardness   250 mg CaCO 3/dm 3
• Fe   0,2 mg/dm3.

Installation point connections:
• Cold tap water connection ½” or ¾”.
• 230V power supply socket.
• Drain.

General information:

– Fed by tap water.

– Water purification process levels:

• sediment pre-filter 5µm,

• integrated module (sediment-carbon-softening),

• demineralization on an spectrally clean ion-exchange TOC bed,

• reverse osmosis,

• UV lamp 185/254 nm,

• microfiltration capsule 0,45/0,2μm.

– Device efficiency min. 20-22 dm3/h.
– Demineralized water conductivity 0,55 μS/cm.
– Water collection point – I purity class (PN-EN ISO 3696:1999, ASTM, EP).
– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses.
– System equipped with a 10 dm3 pressure storage tank.

– Automatic ultrapure water recirculation between water collections.
– Fed by cold water: 5-40ºC.
– Power supply: 230V/50Hz.

Standard:

Water purified in this device fits the PN-EN ISO 3696:1999 standard for I purity class and microbiological/physicoche - mical FP requirements for purified production water.

Application:

Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses, molecular biology

* * device equipped with an ultrafiltration module UF.

Technical specification:
- Fed by tap water.
- Purification process stages:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• demineralization on an spectrally clean ion-exchange TOC bed,
• UV lamp 185/254 nm,
• microfiltration capsule 0,45/0,2µm.
- System efficiency: min. 20 dm3/h.
- Purified water conductivity  0,055 μS/cm.
- Automated and unattended system performance.
- Water collection point – first purity class (PN-EN ISO 3696:1999, ASTM, FP) compliant with a microfiltration capsule 0,45/0,2µm.
- Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right.
- The possibility of installing additional water intake point for general-purpose water (third class; PN-EN ISO 3696:1999).
- Equipped with a 10dm3 pressure tank for third class.
- Can be connected to other devices.
- Automatic shutdown when the tank is full or the filtrate valve is closed.
- Automatic ultrapure water recirculation between water collections (modes: continuous or periodic).
- Maintenance procedures may be performed by the user (easy disposable materials replacement).
- Flow rating of clear water min. 1 l/min.
- Intended to be fed by cold water: 5-400C.
- Installation may be performed by the user.
- Acid-proof stainless steel (inox) housing.
Dimensions: 275x470x570 mm
Tank 10l: h. 390 mm, Ø 250 mm

Made InPoland

Write a review

Note HTML is not translated!
Bad Good
Captcha
47,292.44 SAR
Price Include VAT
  • Stock: In Stock
  • Model: Hydrolab
  • SKU: 20DR-TOC-UV
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

Notify me when product is available

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Phone